Northern Lights Cedar Tubs offers the widest variety of hot tub heating systems in the market! From single pump circulation to dual pump Hi-performance jetted hot tub systems. All our main electrical hot tub components are manufactured in California by Applied Computer Controls (ACC), the controls that pioneered the spa industry. We offer both North American UL certified products as well as International CE certified components. The Northern Lights advanced spa controller by ACC provides a flexible, intuitive system for controlling and monitoring hot tubs and spas. Featuring IPX4 weather resistance, ACC spa packs are protected from splashing water. All our systems can be used on any hot tub or spa, including custom installations!
Call us to discuss your heating needs
The Northern Lights Advanced Spa Controller is a full featured spa pack that is provided standard with our Hi-Performance Heating Systems. Controls a 2-speed primary pump, a single speed air blower or a single speed secondary pump, a 12-volt spa light, an auxiliary light and an ozonator. The system comes with a calibrated pressure switch and a heavy duty 2 pole contractor to control the 5 KW heating element. This system is convertible to run on 120 volts.
Gas heating is an efficient and cost-effective heating method but limited to above freezing temperatures. With winter being considered one of the best times to enjoy a hot tub, Northern Lights is proud to introduce the Hybrid Spa Controller. Simply plumb your supply & return and let the spa pack take over. When the weather turns too cold for the gas heater, the Hybrid Spa Controller will switch to electric heat.
Arctic Heat Pumps Advanced Spa Controller provides a hybrid ready system for the addition of an Arctic Heat Pump. This allows you to cut energy cost by up to 80%, simply by using the heat pump. However, if at any time the heat pump requires assistance, such as when the temperature drops below -20C (5F), the electric heater will automatically turn on and take over.
Need extra heating capacity or quicker heat up times? Combine the ACC 5KW AUX heater with the Northern Lights Advanced Spa Controller for 10KW of electric heating capacity.
Northern Lights Standard Configuration (5 kW-Domestic / 2.7 kW-International)
Northern Lights Configuration With Auxiliary Heater (10 kW-Domestic / 5.5 kW-International)
Arctic Heat Pumps Hybrid Standard Configuration (5 kW-Domestic / 2.7 kW-International)
Northern Lights Hybrid Gas Configuration (5 kW-Domestic / 2.7 kW-International)
The Arctic Spa Pack integrates completely with the Arctic Heat Pump. As soon as you turn the temperature down below the tubs current temperature, the LCD display will switch and show “Chilling.” The Spa Pack will then send a signal to the heat pump to open its four-way reversing valve and in minutes will be chilling the tub.
Automatic Mode – simply set it and forget it. If the weather turns too hot, your spa will always remain at the temperature you set it to. If you want to have a cold chill tub but don’t want your spa to freeze during the cold season, the Northern Lights Arctic Spa system will add heat when needed to keep your tub from freezing and should the weather suddenly get warm, the system will start to chill.
Have questions about our handcrafted cedar hot tubs? We're here to help! Whether you're looking for product details, installation guidance, or need assistance with an order, our team is ready to assist you.
Fill out the form, and our team will get back to you as soon as possible.
